Panasonic ET-DLE035 - Lens Position Setup and Focus Adjustment; Lens Position Setup

ENGLISH-9
Lens position setup and focus adjustment
Lens position setup
z
When using PT-RZ120
When moving the lens position to the home position, perform the operation with the following procedure.
1) Turn on the projector to start the
projection.
2) Press the <MENU> button to
display the [MAIN MENU] screen.
3) Select [PROJECTOR SETUP] in
the main menu and then press the
<ENTER> button.
4) Select [LENS] in the [PROJECTOR
SETUP] menu and then press the
<ENTER> button.
z
The[LENS]screenappears.
5) Select [LENS TYPE] on the [LENS]
screen and then use the
◄►
buttons to select [ET-DLE035].
z
Each press of the ◄► buttons switches the
itemto[NORMAL]or[ET-DLE035].
6) Select [LENS HOME POSITION] on
the [LENS] screen and then press
the <ENTER> button.
z
Aconrmationscreenappears.
7) Use the ◄► buttons to select [OK]
and then press the <ENTER>
button.
z
[PROGRESS]isdisplayedonthe[HOME
POSITION]screenandtheprojectionlens
moves to the home position.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
1/2
1/2
MENU SELECT
SUB MENU
PROJECTOR SETUP
PROJECTOR ID
ALL
PROJECTION METHOD
LENS
OPERATION SETTING
NORMAL
LIGHT OUTPUT
100.0%
BRIGHTNESS CONTROL
AUTO
STANDBY MODE
NORMAL
QUICK STARTUP
OFF
NO SIGNAL SHUT-OFF
DISABLE
NO SIGNAL LIGHTS-OUT
DISABLE
ENTER
MENU SELECT
CHANGE
LENS
LENS TYPE
NORMAL
LENS HOME POSITION
LENS CALIBRATION
Note
z
If[LENSTYPE]ismistakenlysetto[NORMAL],theprojectionlenswillnotmovetothecorrecthomeposition.