4 -
ENGLISH
Before Use
■ Overview
This product suppresses vibration of projection images due to vibration of the lens by xing the projection lens of
the projector.
■ Supported Projectors
PT-RQ32K, PT-RZ31K, and PT-RS30K series
PT-RQ13K, PT-RZ12K, and PT-RS11K series
PT-RZ21K and PT-RS20K series
Note
z
Models other than the above may also be supported. Refer to the operating instructions of the projector you
are using.
■ Structural components
Part name Appearance (quantity) Application
Lens xing attachment
mount bracket
x1
This part attaches to the projector unit.
It is a bracket for attaching the lens xing
attachment bracket
Lens xing attachment
bracket
x1
This part attaches to the lens xing
attachment mount bracket.
It is a bracket for adjusting and xing the
positions of the lens xing brackets.
Lens xing bracket (A)
x2
These x a lens other than the ET-D75LE50 /
ET-D75LE90 / ET-D75LE95 / ET-D3LEW50 /
ET-D3LEF70.
Lens xing bracket (B)
x2
These x the ET-D75LE50 / ET-D75LE90 /
ET-D75LE95 / ET-D3LEW50 / ET-D3LEF70.
Screws and washers Spring washer (M4)
x4
These are used for bracket assembly and
xing the lens xing brackets.
Flat washer (M4)
x4
Thumbscrew (M4 x 10)
x8
To Next Page
Loading...
