12
English
b
Press “+” or “-” on
the water pressure
regulator switch
untilthedesiredow
intensityisreached.
• Keep pressing “+” or “-”
will continuously change
the water pressure.
c
SettheStop/Jetswitchto“
”(stopmode)to
stopjettingtemporarily.
■
Waterpressurelevelmemoryfunction
The last selected water pressure level will be
remembered from the second time onward.
4
Cleaninsideyourmouth
withwaterjet.
a
Place the nozzle in
yourmouth.
b
Closeyourmouth
gently.
c
SettheStop/Jetswitch
to “
”(jetmode).
• If you want to pause the water jet, set the
Stop/Jet switch to “
” (stop mode).
• You can switch the water pressure level by
pressing the water pressure regulator switch
even while using the appliance.
Operation time with full water:
approx.180seconds
(When the ultrasonic nozzle is used and the
water pressure level is set to 10)
►
To adjust the orientation of the
nozzle(Fororthodonticnozzleonly)
You can adjust the direction of water
jet by rotating the nozzle handle.
Notes
• Always use new tap water or lukewarm water.
• If water is cold, use lukewarm water with temperature
40 °C or below.
• Do not turn on the power switch “
” when the water
tank is empty (except discharging the water inside the
main unit). (Doing so may cause malfunction.)
• The recommended operating temperature of the
appliance is 5 °C - 40 °C. If the indoor temperature is
over or lower than the recommended temperature, the
appliance may stop operating.
• When the Stop/Jet switch is set to “
” (stop mode)
for more than 1 minute, turn o the power switch “
”.
(Doing so may cause malfunction.)
• When you use the appliance for the rst time, please
start with water pressure level 1 (Child mode “
”).
• Do not push the tip of the nozzle too hard against the
teeth or gums. (Excluding the orthodontic nozzle.)
• When you feel that the irritation is strong, set the Stop/
Jet switch to “
” (stop mode) and use the
appliance
from the water pressure level 1 (Child mode
“ ”)
.
Keep your face
over the basin.
Weak Strong
(Level 10)
(Level 1)
(Child mode
“ ”
)