Panasonic EW1614 - How to Use

11
English
How to use
1
Insert the power plug into a household outlet,
andllthewatertankwithwater.
a
Insert the power plug
into a household
outlet.
• The cord can be
pulled out from either
the right or the left.
❷
❺
❹
❶
❸
b
Open the water tank
cap.
c
Remove the water
tank,andllitwith
water.
• When lling water, be
sure not to exceed the
upper water level limit.
d
Set the tank to the
mainunitrmly.
e
Attach the water tank
cap.
2
Installthenozzle,andturnonthepower.
a
Installthenozzle.
• Choose a nozzle for
your purpose. (
See pages
13 and 14.
)
b
EnsuretheStop/Jet
switch is set to “
”
(stopmode).
c
Press the power switch
“ ” to turn on the
power.
• The water pressure level
LED indicator lights on.
•
The power will be cut o󰀨
after about 10 minutes to
avoid forgetting to turn o󰀨.
(The function for avoiding
forgetting to turn o󰀨.)
a
b c
3
Press the water pressure
regulator switch to select
thewaterpressurelevel.
a
With the nozzle facing
the basin, set the
Stop/Jetswitchto
“
”(jetmode)to
jetwater.
Prepare
Place the main unit on a at and stable
surface.
Upper water
level limit
Press
Press in rmly until a
"click
"
is heard.
Click
Press
Stop/Jet switch