Panasonic EW1614 - Page 15

15
English
2
Throwawaytheremainingwater.
a
Remove the water tank, and
throwawaytheremaining
water.
• While removing the water
tank, press the main unit by
hand.
• Change the water every
time when you use the
appliance.
b
Washthewatertank.
3
Remove the remaining water
fromthemainunit.
a
Install the water tank, and
turn on the power switch
“
”.
b
With the nozzle facing the
basin,settheStop/Jet
switch to “
”(jetmode)
to remove the remaining
waterfromthemainunit.
c
When there is no water
coming out, set the
Stop/Jetswitchto“
”
(stopmode),andturno󰀨
the power switch “
”.
a
b
4
Disconnect the power plug
fromthehouseholdoutlet.
5
Cleanthehandle.
• Rinse the cloth of the tongue care nozzle with
running water.
• Do not bump it on the washbasin when swinging it
dry.
6
Storeitafteritisdry.
a
Wipeo󰀨anymoisturewith
atowelanddryina
well-ventilatedshade.
b
Storetheappliance.
• Mount the handle and water
tank to the main unit, and
place the nozzle on the
nozzle stand.
•
When two or more nozzles
are placed on the nozzle
stand, make sure that they
do not come in contact with
each other.
Stop/Jet switch
Drainage
outlet
Pull out the
nozzle while
pressing the
button.
Nozzle release
button
Cloth