Panasonic EX-21 Series - Mounting to Mounting Spacer (Optional) (Front Sensing Type)

8
3-3 Mounting to mounting spacer (Optional)
(Front sensing type)
 
MS-EX20-FS
Mounting method
1. Fit the mounting spacer on the sensor.
2. Align the mounting holes of the mounting spac-
er and the sensor and mount with M3 screws.
The tightening torque should be 0.5N·m or less.
Mounting spacer
MS-EX20-FS
(Optional)
M3 screws
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com