WX WY WR WL SV EV DT LD FL I K H f
modifier device
n A A A A A A A A A A A A N/A A N/A
Description
This instruction selects the current index register bank number.
Precautions during programming
The bank number is automatically set to bank 0 before execution of the starting address of the program.
If the program memory is 120K steps, when the program is switched to the No. 1 program or the No. 2
program, the index register bank number is automatically set to 0.
F410
P410
(PSETB)
(SETB)
Setting the index register bank number