5-59
5.1.9 Table of Special Data Registers for FP0R
FP0R (A: Available, N/A: Not available)
Address
Name Description
Read-
ing
Writ-
ing
DT90000
Self-diagnostic error
code
The self-diagnostic error code is stored here
when a self-diagnostic error occurs.
A N/A
DT90001 Not used - N/A N/A
DT90002 Not used N/A N/A
DT90003 Not used - N/A N/A
DT90004 Not used - N/A N/A
DT90005 Not used - N/A N/A
DT90006 Not used - N/A N/A
DT90007 Not used - N/A N/A
DT90008 Not used - N/A N/A
DT90009 Not used - N/A N/A
When the state of installation of FP0
expansion I/O unit has changed since the
power was turned on, the bit corresponding to
the unit No. will turn on. Monitor using binary
display.
DT90010
Extension (right side)
I/O verify error unit
[0 to 3]
A N/A
DT90011 Not used - N/A N/A
DT90012 Not used - N/A N/A
DT90013 Not used - N/A N/A