5-76
FP0R (A: Available, N/A: Not available)
Address Name Description
Read-
ing
Writ-
ing
DT90400 Lower words A A
DT90401
Elapsed value
area
Higher words A A
DT90402 Lower words A N/A
DT90403
Target value
area
Higher words A N/A
DT90404 Lower words A N/A
DT90405
Target value
area for match
ON/OFF
Higher words
Available for the transistor
output type only.
Note) When controlling the
pulse output CH by
F166(HC1S), F167(HC1R)
instructions, the target
value is stored.
The target value for match
ON/OFF is stored.
A N/A
DT90406
Corrected
speed of initial
speed
The initial speed of the
calculated result is stored. A N/A
DT90407
Deceleration
minimum
speed
Lower words
The minimum speed for the
change of speed.
A N/A
DT90408 Lower words A N/A
DT90409
Acceleration
forbidden area
starting
position
Higher words
PLS-
CH0
If the elapsed value corsses
over this position when
changing the speed,
acceleration cannot be
performed.
A N/A
DT90410 Lower words A A
DT90411
Elapsed value
area
Higher words A A
DT90412 Lower words A N/A
DT90413
Target value
area
Higher words A N/A
DT90414 Lower words A N/A
DT90415
Target value
area for match
ON/OFF
Higher words
Available for the transistor
output type only.
Note) When controlling the
pulse output CH by
F166(HC1S), F167(HC1R)
instructions, the target
value is stored.
The target value for match
ON/OFF is stored.
A N/A
DT90416
Corrected
speed of initial
speed
The initial speed of the
calculated result is stored.
A N/A
DT90417
Deceleration
minimum
speed
Lower words
The minimum speed for the
change of speed. A N/A
DT90418 Lower words A N/A
DT90419
Acceleration
forbidden area
starting
position
Higher words
PLS-
CH1
If the elapsed value corsses
over this position when
changing the speed,
acceleration cannot be
performed.
A N/A