5-181
FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP3
FP2/
FP2SH
FP10SH
Name Descriptions
Read-
ing
Writ-
ing
DT9053
DT90053
(*Note)
Real-Time Clock
(Clock/Calendar
) monitor
(hour/minute)
Hour and minute data of the Real-Time
Clock(Clock/Calendar) are stored here.
This data is read-only data. It cannot be
overwritten.
A N/A
DT9054
DT90054
(*Note)
Real-Time Clock
(Clock/Calendar
) monitor and
setting
(minute/second)
DT9055
DT90055
(*Note)
Real-Time Clock
(Clock/Calendar
) monitor and
setting
(day/hour)
DT9056
DT90056
(*Note)
Real-Time Clock
(Clock/Calendar
) monitor and
setting
(year/month)
DT9057
DT90057
(*Note)
Real-Time Clock
(Clock/Calendar
) monitor and
setting (day-of-
the-week)
The year, month, day, hour, minute,
second and day-of-the-week data for the
calender timer is stored. The built-in
Real-Time Clock(Clock/Calendar)
will operate correctly through the year
2099 and supports leap years.
The Real-Time Clock
(Clock/Calendar) can be set (the time
set) by writing a value using a
programming tool software or a program
that uses the F0 (MV) transfer
instruction.
A A
Note) In the FP2, an expansion memory unit is necessary.