5-189
FP2/FP2SH/FP3/FP10SH (A: Available, N/A: Not available)
Address
FP3
FP2/
FP2SH
FP10SH
Name Descriptions
Read
-ing
Writ-
ing
DT9148
(*Note1)
DT90148
(*Note1)
The number of times the receiving operation is
performed (counted using ring counter)
DT9149
(*Note1)
DT90149
(*Note1)
The current interval between two receiving
operations: value in the register x 2.5 ms
DT9150
(*Note1)
DT90150
(*Note1)
The minimum interval between two receiving
operations: value in the register x 2.5 ms
DT9151
(*Note1)
DT90151
(*Note1)
The maximum interval between two receiving
operations: value in the register x 2.5 ms
DT9152
(*Note1)
DT90152
(*Note1)
The number of times the sending operation is
performed (counted using ring counter)
DT9153
(*Note1)
DT90153
(*Note1)
The current interval between two sending
operations: value in the register x 2.5 ms
DT9154
(*Note1)
DT90154
(*Note1)
The minimum interval between two sending
operations: value in the register x 2.5 ms
DT9155
(*Note1)
DT90155
(*Note1)
MEWNET-
W/-P PC
link status
[PC link 1
(W/P)]
(*Note2, 3)
The maximum interval between two sending
operations: value in the register x 2.5 ms
DT9156
(*Note1)
DT90156
(*Note1)
Area used for measurement of receiving
interval.
DT9157
(*Note1)
DT90157
(*Note1)
MEWNET-
W/-P PC
link status
[PC link 0
(W/P)]
(*Note2, 3)
Area used for measurement of sending
interval.
DT9158
(*Note1)
DT90158
(*Note1)
Area used for measurement of receiving
interval.
DT9159
(*Note1)
DT90159
(*Note1)
MEWNET-
W/-P PC
link status
[PC link 1
(W/P)]
(*Note2, 3)
Area used for measurement of sending
interval.
N/A N/A
Note1) Used by the system.
Note2) When the system register 46 = K0, First: PC link 0, second: PC link 1
When the system register 46 = K1, First: PC link 1, second: PC link 0
Note3) For MEWNET-W system, available PLC type: FP2/FP2SH/FP3/FP10SH
For MEWNET-P system, available PLC type: FP3/FP10SH