Panasonic FP-E - Page 673

High−level Instructions
3 − 409
Outline Starts sampling data which is preset in trace memory.
Program example
Ladder
Diagram
Boolean
Ladder Diagram
Address Instruction
F155 SMPL
Trigger
R10
10
10
11
ST R 10
F155 (SMPL)
Explanation of example
When the execution condition (trigger) R10 turns on, sampling of a relay (contact) and register registered in
advance is carried out.
R10
off on on off
Sample
Sampling
on
off
on
off
Registration of the data to be sampled, specification of the sampling method (such as the cable and the time
interval), and specification of the sampling trace can be done using only the programming tool software.
Description
During a sampling trace, sampling of the specified data (relay contacts and registers) is carried out, and the
data contents at the time of sampling are stored in the sampling trace memory.
If the sampling trace settings and the startup have not been specified using the programming tool software,
processing will not be carried out, even if the execution condition (trigger) is fulfilled.
F155
P155
(PSMPL)
(SMPL)
Sampling start
FP2/FP2SH/FP10SH
FP−X(V2.00ormore)
FPΣ (V3.10 or more)/FP0R
Availability
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com