High−level Instructions
3 − 477
Example of target value match OFF setting
When specifying the pulse output
Condition
(1) Specify the pulse output channle number 0.
(2) Set the targe value to 10000.
(3) Set the output coil to be turned off when the values match to Y2.
(DF)
F167 HC1R, H100, K10000, Y2
R0
Pulse output control start
Execution of program
10000
0
R0
R9130
Y2
Targe value match OFF
End of F166 control (clear)
Elapsed value
Target value
Control flag
The number of the pulse output control flag varies depend-
ing on the channel used.
Regarding the channel number and control flag for each
model, refer to the table on the next page.
FP0R
To Next Page