High−level Instructions
3 − 503
Flag conditions
・Error flag (R9007): Turns on and stays on when:
・Error flag (R9008): Turns on for an instant when:
− The area is exceeded when an index modifier is used.
− The “n” is outside specification range.
− The data of “S, S+1” to “S+4, S+5” are outside specification range.
− The “S+2, S+3” > “S+4, S+5”.
− With the FP−X, the pulse output has not been set by the system register.
FPΣ/FP−X
To Next Page