High−level Instructions
3 − 586
Description
Performs exclusive NOR operation on each bit in the 32-bit equivalent constant or 32-bit data specified by
“S1+1 and S1” and “S2+1 and S2” when the trigger turns on. The exclusive NOR operation result is stored in
the 32-bit area specified by D.
You can use this instruction to check how many bits in two 32-bit data items are the same.
Flag conditions
・Error flag (R9007): Turns on and stays on when the area specified using the index modifier
exceeds the limit.
・Error flag (R9008): Turns on for an instant when the area specified using the index modifier
exceeds the limit.
・= flag (R900B): Turns on for an instant when the calculated result is recognized as “0”.
To Next Page