High−level Instructions
3 − 614
Flag conditions
ΣError flag (R9007): Turns on and stays on when
Σ Error flag (R9008): Turns on for an instant when
− There is an error in the control string specified by S1.
− The direction of converted data is changed to the normal direction when the
conversion format specified by S1 is in decimal.
− The size of the area for storing ASCII codes specified by N exceeds the
rated value when the conversion format specified by S1 is in hexadecimal.
(Rated value for 16−bit data: 4)
(Rated value for 32−bit data: 8)
− The No. of the converted blocks specified by N is 0.
− The size of the area for storing ASCII codes specified by N is 0.
− The ASCII code to be converted exceeds the area.
− The area specified using the index modifier exceeds the limit.
FPΣ/FP−X/FP0R
To Next Page