High−level Instructions
3 − 699
Outline Triangle functions, This instruction calculates arccosine [COS
−1
( )].
For the FP0R/FPΣ/FP−X/FP0/FP−e, the P type high−level instruction
“P318 (PACOS)” is not available.
Program example
Boolean
Ladder Diagram
Address Instruction
S
Trigger
D
F318 ACOS, DT10, DT2010
R0
10
11
ST R 0
F318 (ACOS)
DT 10
DT 20
S Angle data (2 words) or lower 16-bit area of 32-bit data where angle data is
stored
D Lower 16-bit area of 32-bit data where calculated result is stored
Operands
O
WX WY WR WL SV EV DT LD FL I K H f
modifier device
S A A A A A A A A A A A A A A* A
D N/A A A A A A A A A A N/A N/A N/A A A
* Index modification of a real number is not possible.
Description
COS of the value specified in S+1 and S is calculated, and the result [an angle data (units and radians)] is
stored in D+1 and D.
COS
−1
([S+1, S]) → [D+1, D]
Specifying the integer device with [S], the integer data is internally converted to real numbers before
operations continue.
F318 ACOS, % DT 0, DT 4
R0
Specifying the integer device with [D], the real numbers are automatically converted into integer data.
F318 ACOS, DT 0, % DT 4
R0
When the constant K is specified in S, the operations are the same as when a integer device is specified.
F318
P318
(PACOS)
(ACOS)
Floating point data Arccosine operation