Panasonic FP0H User Manual (English)

Other manuals for Panasonic FP0H

User Manual200 pages

Quick Start Guide17 pages

Questions and Answers:

J
Jerry GutierrezAug 3, 2025
How to fix Panasonic Controller ERR/ALM LED flashing?
- R
  Rebecca LoweAug 3, 2025
  If the Panasonic Controller's ERR/ALM LED is flashing, this indicates a syntax error or self-diagnostic error. To resolve this, first check the error code using the programming tool. If it's a positioning operation error, press the [Positioning errors] button, then the [Clear Error Log] button, followed by the [Yes] and [Close] buttons. Clear the errors by pressing the [Clear errors] button. Correct any positioning parameters or tables, and download the corrected data.
N
Nicholas PowellAug 9, 2025
What to do if Panasonic FP0H motor does not rotate and output LED flashes?
- J
  John FlynnAug 9, 2025
  If the Panasonic Controller motor isn't rotating or moving, and the output LED is flashing or ON, ensure the servo on input is set to “ON”. Also, verify that the power supplies for the servo amplifier and motor driver are ON. Check that the servo amplifier and motor driver are correctly connected to the unit, and confirm that the settings for the pulse output method (CW/CCW method or Pulse/Sign method) are appropriate.
J
Jessica HicksAug 15, 2025
What to do if Panasonic Controller motor does not rotate and output LED is OFF?
- U
  uosborneAug 15, 2025
  If the Panasonic Controller motor is not rotating or moving and the output LED is OFF, review the program and ensure the I/O numbers are appropriate. Check for non-rewriting of the start flag in the program. Also, verify the input valid logic of the over limit switch. Note that the error LED will flash in this case.
R
rachel17Aug 21, 2025
Why is the Panasonic FP0H Controller rotation direction reversed?
- Q
  qcarterAug 21, 2025
  If the rotation or movement direction of the Panasonic Controller is reversed, check that the servo amplifier and motor driver are connected correctly to the unit. Change the pulse output rotation direction of the parameters for each axis to the reverse direction. Also, check that the CW/CCW output or the Pulse/Sign output is connected to the correct input of the servo amplifier and motor driver.
P
patrickpetersAug 27, 2025
How to fix Panasonic FP0H Controller self-diagnostic error (error code 20 or more)?
- A
  Ashley SchneiderAug 27, 2025
  To resolve a self-diagnostic error (error code 20 or more) on the Panasonic Controller, refer to the list of error codes and correct the settings or programs accordingly. Use the programming tool in PROG. mode to clear the error.

Panasonic FP0H Specifications

General

Model	FP0H
Program Capacity	16k steps
Power Supply	24 V DC
Communication Ports	RS232
Programming Language	Ladder
Operating Temperature	0°C to 55°C
High-speed Counter	Yes
Pulse Output	Yes
CPU Type	32-bit
High-speed Counters	4 channels (100kHz)
Pulse Outputs	2 channels (100kHz)