2. Adjust the position (C).
3. Attach (D), then (E) to the joint.
Attach the hand strap firmlyso that the strap does not come off.
When Inserting the Battery Pack / Cleaning inside of the dust cover
CAUTION
n Place the computer on a soft cloth with the panel side down. In addition, make sure that there is no item under the computer.
1. Remove the edge (A) of hand strap passing through the clip. (The illustration shows the top side of hand strap as an example.)
2. Tip the clip (B) back to pull it out of the computer. (Do the same for the bottom side of hand strap.)
- 107 -
To Next Page
Loading...
