Panasonic FZ-G1 Series - Barcode Reader Usage; Installing Barcode Utility; Reading Barcodes

Barcode Reader
<Only for model with Barcode Reader>
Preparation
Before using the barcode reader, you need to installthe Barcode Integrated Utility.
Installing the Barcode Integrated Utility
1.
Touch (Explorer) on the taskbar, and open the “c:\util\bcr_integrated” folder.
2. Touch and hold [setup.exe] in the “bcr_integrated” folder, and touch [Run as administrator].
When the extension is not displayed, touch [View] in Explorer, and add the checkmark to [File name extensions].
Follow the on-screen instructions.
Reading the Barcode
CAUTION
n Do not look directly into the reading window.
DO NOT LOOK DIRECTLY AT THE BARCODE READER LIGHT.
[2D Barcode Key Emulator] enables:
it makes sound when reading barcode is successful.
it reads barcode with 2 bytescode.
1.
Touch (Start) - (Panasonic PC Settings Utility) - (Utilities) - [2D Barcode Key Emulator].
2. Touch [Connection to Barcode (Always-On)].
3. Open the software for reading a barcode, and put the cursor on it.
4. Aim the Barcode Reader (A) at the barcode.
5.
Press button (B).
The Barcode Reader lightsred to indicate the reading position.
- 87 -