Close the batterypackuntilit touch to the secured position.
Be careful about the battery packdirection.
In case that the projection does not match the dents of the computer, detach the battery pack once, then slide it while pushing it lightlyto avoid floating.
CAUTION
n Make sure the latch is securely locked, otherwise the battery pack mayfallwhen you carrythe computer.
n Do not remove the battery pack forcibly when the latches are locked. Doing so may damage the batterypack.
n During battery replacement, the LCD backlight may become dark.
<Only for model with Built-in Bridge Battery>
n If the built-in bridge battery has not enough remaining power, you cannot replace the battery pack without turning off the computer.
Turn off your computer before replacing the battery pack.
- 35 -
To Next Page
Loading...
