n Hibernation from the Windows system menu is not available as the factory default. To enter hibernation from the Windows system
menu, the following setting is necessary.
1.
Touch and hold or on the task tray, and then touch [Power Options].
2. Touch [Choose what the power button does] - [Change settings that are currently unavailable].
3. Add check mark for [Hibernate] and touch [Save changes].
CAUTION
While the computer is entering sleep or hibernation
n Do not:
Use an external mouse or other peripheral devices.
Disconnect the AC adaptor.
Insert and remove the microSD MemoryCard.
Wait until the power indicator blinks green (sleep) or goes off (hibernation).
n It may take 1 or 2 minutes to enter sleep or hibernation. Do not touch any button though the screen becomes dark.
n After releasing the power switch, do not operate it until the power indicator blinks or goes off.
If you press and hold the power switch for longer than 4 seconds, the computer will forcibly shut down.
Unsaved data willbe lost regardless of which option is selected under the “Control Panel” - [Hardware and Sound] - [Power Options] - [Choose
what the power button does] - “When I pressthe power button”.
In sleep or hibernation
n Do not attach or remove peripheral devices. Doing so may cause malfunction.
n Power is consumed in sleep.
When power is exhausted, the data retained in memory willbe lost. Connect the AC adaptor when the computer isin the sleep function for a pro-
longed time.
To resume from sleep or hibernation
1.
Press the power switch (A).
CAUTION
n Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately 15 seconds (nor-
mally) or 60 seconds (when the computer is on a network).
Touch the screen or power switch.
Use an external mouse or other peripheral devices.
- 38 -
To Next Page
Loading...
