Panasonic Generation Plasma Display Television

How to Reset the Unit
To Reset the Unit, turn the TV on and while
pressing the “VOLUME ( - )” button on the
main unit, press the “Menu” button on the
remote control for more than 3 seconds. The
Self-Check menu appears on screen. Then,
disconnect the AC cord from the wall outlet.
To Reset the Unit, turn the TV on and while
pressing the “VOLUME ( - )” button on the
main unit, press the “Menu” button on the
remote control for more than 3 seconds. The
Self-Check menu appears on screen. Then,
disconnect the AC cord from the wall outlet.
Note: All customer programmed parameters will be erased.
89