Watching TV
Blu-ray, DVD, Game Console, etc.
Connecting and viewing (2)
2. Select Input
1. Display menu (With the connected equipment turned ON)
IINPUTI
2. Select the input used in step 1
Select correct input source, using _ / V and press
You can also press the corresponding NUMBER button or press I INPUT I
repeatedly to cycle through the available inputs. If you are unsure which input to
select, wait 2 seconds between each selection.
Component and Composite (Video) IN
terminals are shared and must be connected
using the supplied adapter.
NOTE: One red connector is for video and the
other audio.
•
AUDIO
You need to select Video or Component.
(Default: Video)
• PressIINPUT land select
• Press _ / _ to choose Video or
Component,
VIDEO
• For your convenience, you can edit the inputs with labels that are easy to
remember.
d ._m
Edit Labels Set ANT/Cable in
3. Operate using your device's remote control.
21
To Next Page
Loading...
