Watching TV
3D
3D settings (1)
IMENUI > >
Auto detect 3D Off/Auto 1/
2
• Auto 1: Switches to 3D display when 3D
indication is available (HDMI (3D), AVCHD file,
etc.)
° Auto 2: Same as Auto 1. Also detects 3D signal
by identifying similar image in side-by-side or top-
and-bottom 3D formats.
Note: Choose 3D mode manually when auto
detection is not available.
3D signal Off/On • On: Displays a message according to the
notification signal received by the
2D --, 3D Minimum/ ° Adjusts 3D depth. Available only when
depth Medium/ is selected in i:_:
Maximum ° Available only when 3D content is displayed.
37
To Next Page
Loading...
