Panasonic HC-X20 - V-Log recording function [X2]

Special recording function – V-Log recording function [X2]
194
V-Log recording function [X2]
It is possible to record with a rich range of latitude for more expressive images.
• The recorded images are suited to color grading.
1
Select the [SCENE FILE] menu ¨ [GAMMA MODE SEL] ¨ [V-Log].
[VLog] is displayed in the camera image screen.
 Note regarding V-Log image output
Settings can be made with the following menus.
The images are output with settings suited to V-Log images or previews.
• <SDI OUT> terminal:
[VIDEO OUT/LCD/VF] menu ¨ [SDI SETTING] ¨ [SDI OUT V-Log]
• <HDMI> terminal:
[VIDEO OUT/LCD/VF] menu ¨ [HDMI SETTING] ¨ [HDMI OUT V-Log]
• Viewfinder, LCD monitor:
[VIDEO OUT/LCD/VF] menu ¨ [VF] ¨ [LCD/VF V-Log]
• The following functions cannot be set.
– [CAMERA] menu ¨ [SW MODE] ¨ [IR REC]
– [SCENE FILE] menu ¨ [MASTER DTL]/[DTL CORING]/[V.DTL LEVEL]/[SKIN TONE DTL.]/[SKIN DTL EFFECT]/
[CHROMA LEVEL]/[CHROMA PHASE]/[MATRIX]/[COLOR CORRECTION]/[MASTER PED]/[GAMMA SETTING]/[KNEE
SETTING]/[WHITE CLIP SETTING]/[DRS]/[DRS EFFECT DEPTH]
– [VIDEO OUT/LCD/VF] menu ¨ [SDI SETTING] ¨ [SDI OUT ZEBRA]
– [VIDEO OUT/LCD/VF] menu ¨ [HDMI SETTING] ¨ [HDMI OUT ZEBRA]
– [VIDEO OUT/LCD/VF] menu ¨ [EI ASSIST] ¨ [ZEBRA]/[ZEBRA1 DETECT]/[ZEBRA2 DETECT]/[ZEBRA2]