Notes – Updating the unit’s firmware
298
Updating the unit’s firmware
After confirming the firmware version of the unit with [OTHERS] menu ¨ [INFORMATION] ¨ [VERSION], access the
latest information regarding the firmware on the website shown below, then download the firmware if necessary.
•
Update is completed by loading the downloaded file to the unit via the memory card. Insert the memory card that stores the
update file into card slot 1, and select the [OTHERS] menu ¨ [INFORMATION] ¨ [UPDATE].
For the latest update information, check the support website below. (As of August 2022)
https://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
• When updating the firmware, use the AC adaptor or sufficiently charged battery.
• Do not turn off the power while updating the firmware. Rewriting of the firmware may fail and the unit may not be activated.
To Next Page
Loading...
