What you can do with this unit
19
(ENG) DVQX2031
Card reader mode
Data (files) for performing nonlinear editing on a computer are transferred.
≥ The unit supports USB2.0.
*1 Memory cards are optionally available. They are not supplied with the unit.
*2 A USB2.0 cable is not supplied with the unit.
Use a commercially-available generic USB cable conforming to USB2.0. If possible, we
recommend using a cable with a length of 1.5 m or less.
The unit does not offer a bus-powered function.
Connecting to the network
This unit is equipped with wireless LAN. It can connect to wireless LAN devices via a network.
Available functions
When the unit is connected to a network, the following functions are available.
≥ Connecting to HC ROP app
You can remotely control this unit with the HC ROP app by connecting this unit with an iPhone/
iPad or Android terminal via wireless LAN.
≥ Streaming function
You can perform streaming of audio and video currently shot with the unit over a network
(wireless LAN).
A Memory card
*1
B USB2.0 cable
*2
C Computer
HC-X1500-X2000-DVQX2031_eng.book 19 ページ ２０２０年１月６日 月曜日 午後２時５４分
To Next Page
Loading...
