76
VQT4C76
When recording, the input level from the built-in microphones and the external microphone
terminal can be adjusted.
When recording, the input level from the built-in microphones can be adjusted.
1 Select the menu.
≥ It is possible to select the setting from the quick menu in Manual Mode. (l 42) The
microphone level returns to the setting adjusted previously, and it cannot be set from the
quick menu.
2 (When [SETr ]/[SET] is selected)
Touch / to adjust.
≥ Touch to activate/deactivate AGC. When AGC is activated, the icon is surrounded by
yellow and the amount of sound distortion can be reduced. When AGC is deactivated,
natural recording can be performed.
≥ Adjust the microphone input level so that the last 2 bars of the gain value are not red.
(Otherwise, the sound is distorted.) Select a lower setting for microphone input level.
3 Touch [ENTER] to set the microphone input level and then touch [EXIT].
≥ (Microphone input level meter) appears on the screen.
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted
automatically.
[SETr ]/[SET]: The desired recording level can be set.
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
G Left
H Right
I Microphone input level
HC-X800
HC-X900M&X800P&PC&PU-VQT4C76_mst.book 76 ページ ２０１２年１月１１日 水曜日 午後１０時６分
To Next Page
Loading...
