Others
116
VQT1A15
Problem Check points
“PUSH THE RESET
SWITCH.” or “CHECK
THE DISC AFTER
PUSHING THE RESET
SWITCH TO REPAIR IT.”
is displayed.
≥Is the disc scratched or dirty?
# After using the following method to restart the unit, eject the disc
and clean it. (l 25) If there are scratches on the disc, use a new
disc.
≥The unit has automatically detected an error. Press the RESET
button with the projecting part of the grip belt A. This will restart the
unit.
≥If you do not press the RESET button, the power to this unit is
turned off automatically about 1 minute later.
≥Even after you press the RESET button, the indication may still
appear repeatedly. If so, this unit needs repair. Detach the power
connected, and consult the dealer who you purchased this unit
from. Do not attempt to repair the unit by yourself.
A
VQT1A15ENG.book 116 ページ ２００７年１月２９日 月曜日 午後８時２４分
To Next Page
Loading...
