Panasonic HDC-DX1 - To Disconnect USB Cable Safely

99
VQT1A15
With a computer
1 Double click the icon in task
tray displayed on the computer.
≥Hardware disconnect dialogue appears.
≥Depending on your computer’s settings,
this icon may not be displayed.
2 Select [USB Mass Storage
Device] and click [Stop].
≥Verify [MATSHITA HDC-DX1 USB Device]
is selected and click [OK].
3 Select [USB Mass Storage
Device] and click [Stop].
≥Verify [MATSHITA DVD-RAM LMXK1987
USB Device] is selected and click [OK].
≥Click [Close], and you can safely
disconnect the USB cable.
≥Do not disconnect the USB cable while the
ACCESS/PC lamp or card access lamp lights
(
appears on the LCD monitor) as it may
damage the data.
To disconnect USB cable
safely
VQT1A15ENG.book 99 ページ ２００７年１月２９日 月曜日 午後８時２４分