Panasonic HDC-DX1 - Using the Menu Screen

38
VQT1A15
Setup
Using the menu screen
Refer to “Menu list” (l 102) for information about
the menus.
1 While stopped, press the MENU
button.
The menu displayed differs depending on the
position of the mode dial.
≥Do not switch the mode dial when the
menu is displayed.
2 Move the cursor button up or
down in order to select the
desired top menu A.
3 Move the cursor button right or
press the cursor button.
The submenu B is displayed.
4 Move the cursor button up or
down in order to select the
submenu item.
C Current settings on menus
5 Move the cursor button right or
press the cursor button.
6 Move the cursor button up or
down in order to select the
desired item.
7 Press the centre of the cursor
button to enter the selection.
To get back to the previous screen
Move the cursor button left.
MENU
A
B
C
VQT1A15ENG.book 38 ページ ２００７年１月２９日 月曜日 午後８時２４分