62
VQT1A15
Recording
(RAM) (-RW) (-R) (-R\DL)
When recording, the input level from the built-in
microphones and the external microphone
terminal can be adjusted.
¬
Rotate the mode dial to select .
1 Press the MENU button, then
select [VIDEO] > [MIC LEVEL]
> [SET
rAGC] or [SET] and
press the cursor button.
AGC: Auto Gain Control
[AUTO]: AGC is activated, and the
recording level is adjusted
automatically.
[SETrAGC]: The desired recording level can be
set. AGC will also be activated to
reduce the amount of sound
distortion.
[SET]: AGC is not activated and so
natural recording can be
performed.
2 Move the cursor button left or
right to adjust the microphone
input level.
A Centre
B Front left
C Back left
D Front right
E Back right
F Microphone input level
≥A gain value for each of the 5 built-in
microphones is displayed. (The input level of
the microphones cannot be set individually.)
3 Press the centre of the cursor
button to set and then press the
MENU button to finish the
setting.
G Microphone input level meter
≥Microphone input level meter is displayed on
the screen.
Microphone level
This is for adjusting the microphone
input level
MENU
A
B
C
D
E
B
C
D
E
G
VQT1A15ENG.book 62 ページ ２００７年１月２９日 月曜日 午後８時２４分
To Next Page
Loading...
