Before using
14
VQT1A15
27) Reset button [RESET] (l 116)
28) LCD monitor (l 18)
29) Power LCD button [POWER LCD] (l 41)
30) Mode select switch [AUTO/MANUAL/FOCUS] (l 44, 64)
31) Viewfinder extension knob (l 18)
32) Card access lamp (l 33)
33) Card slot (l 33)
34) HDMI terminal [HDMI] (l 85, 86, 88)
35) Audio-video output terminal [A/V] (l 89, 90, 93)
≥Use the supplied AV cable only.
36) USB terminal [ ] (l 94, 97)
37) Component terminal [COMPONENT] (l 89)
38) Microphone terminal [MIC]
≥A compatible plug-in powered microphone can be used as an external microphone.
≥When the unit is connected with the AC adaptor, sometimes noise may be heard depending on
the microphone type. In this case, please switch to the battery for the power supply and the noise
will stop.
Due to limitations in LCD production technology, there may be some tiny bright or dark spots on
the LCD monitor screen. However, this is not a malfunction and does not affect the recorded
picture.
A/V MIC
COMPONENT
27
28
29
30
31
32
33
34
35
36
37
38
VQT1A15ENG.book 14 ページ ２００７年１月２９日 月曜日 午後８時２４分
To Next Page
Loading...
