Panasonic HDC-HS200 - Basic Setup and Operation; Selecting Camera Modes and Powering On;Off

24
VQT1Y59
Preparation
Setup
3
Selecting a mode
(Turning the unit on/off)
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to , or while pressing
the lock release button A.
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator goes off.
HDC-TM200
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the mark B.
≥ Status indicator C.
HDC-HS200
OFF
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the status indicator B.
Motion picture recording mode (l 44)
Still picture recording mode (l 48)
Playback mode (l 75, 82)
OFF
HDCTM200&HS200GN-VQT1Y59_mst.book 24 ページ ２００９年１月１５日 木曜日 午後７時３２分