66
VQT1Y59
Function Effect/Setting method
Wind noise reduction
This is for reducing the wind noise coming into the built-in
microphones depending on the wind strength.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 40)
Select the menu. (l 27)
[RECORD SETUP] # [WIND CUT] # [ON]
≥ This function’s default setting is [ON].
Microphone setup
[SURROUND]:
Sound is recorded with
5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone
is interlocked with the zoom
operation. Sounds near the
front of the unit are recorded
more clearly if you zoom in
(close-up) and surrounding
sounds are recorded more
realistically if you zoom out
(wide angle).
[FOCUS MIC]:
Directivity of the centre is
enhanced for recording audio
near the front of the unit
more clearly.
Directivity (sound sensitivity direction) of the built-in
microphones can be adjusted.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 40)
Select the menu. (l 27)
[RECORD SETUP] # [MIC SETUP] # desired setting
≥ This function’s default setting is [SURROUND].
HDCTM200&HS200GN-VQT1Y59_mst.book 66 ページ ２００９年１月１５日 木曜日 午後７時３２分
To Next Page
Loading...
