Panasonic HDC-HS900 - Recording Still Pictures

32
VQT3K80
1 Change the mode to .
2 Open the LCD monitor or
extend the viewfinder.
3 Press the button halfway.
(For auto focus only)
4 Press the button fully.
Focus indication:
≥ If you set the optical image stabilizer function (l 52) to ([MODE1]), then the image
stabilizer function will be more effective. ( (MEGA optical image stabilizer) will be
displayed when the button is pressed halfway.)
≥ The AF assist lamp lights in dark places.
≥ Focus indication will change to registered focus icon when [FACE RECOG.] is set to [ON].
(l 68)
≥ It is recommended using a flash or tripod when recording still pictures in dark places
because the shutter speed becomes slow.
≥ The screen will become darker when the button is pressed halfway if the shutter
speed is 1/25 or slower.
≥ You can also take a picture just by touching the subject to focus. (Touch shutter: l 56)
≥ To print a picture, save the picture to the SD card (l 111) and print using a PC or a printer.
Basic
Recording still pictures
A Focus indication
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful.
B Focus area (area inside brackets)


MEGA
HDC-SD900&TM900&HS900EB-VQT3K80_eng.book 32 ページ ２０１０年１２月２９日 水曜日 午後２時５０分