101
VQT2D32
3
Select print source media and
touch the icon.
≥ If the [PictBridge] indication does not appear or
continues to flash, disconnect and then
reconnect the USB cable.
4 Touch a still picture to be printed.
5 Touch / to set the number of
prints.
≥ Touch [ENTER] after the number of prints is
set.
≥ You can set up to 9 prints.
≥ To cancel the setting, set the number of prints
to [0].
≥ Up to 99 files can be set in succession.
6 Touch .
7 Touch [DATE PRINT]
to select the
date print setting.
≥ If the printer is not capable of date printing, this
setting is unavailable.
8 Touch [PAPER SIZE]
to select the
paper size setting.
[STANDARD]: Size specific to the printer
[4k5 INCH]: L size
[5k7 INCH]: 2L size
[4k6 INCH]: Postcard size
[A4]: A4 size
≥ You cannot set paper sizes not supported on
the printer.
To Next Page