Panasonic HDC-TM10 - Recording (Basic) - Image Stabilization

45
VQT2D32
Recording
Recording (Basic)
5
Optical image stabilizer
function
Optical image stabilizer can stabilize the image without decreasing the image quality as much.
¬Change the mode to .
≥ This function’s default setting is (Active mode).
≥ When recording using the tripod, it is recommended to set to (ON).
≥ Stabilization may not be possible under strong shaking.
ヰハリハヴハ
Optical image stabilizer button
Pressing the button changes the
optical image stabilizer setting.
# # OFF
≥ Set the Intelligent Auto mode to off
before setting the Optical Image
Stabilizer function to off.
: Active mode
This setting gives more stabilization and is
suitable for recording when moving.
: ON
This setting is suitable for recording in a
stable state such as scenery.
O.I.S.: Optical Image Stabilizer