EasyManua.ls Logo

Panasonic HDC-TM10 - Zoom In;Out Function; Zoom Mode

Panasonic HDC-TM10
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
VQT2D32
Recording
Recording (Basic)
4
Zoom in/out function
The maximum optical zoom ratio is 16k.
¬Change the mode to .
Set the maximum optical zoom ratio. If the zoom
magnification exceeds 16k, then the digital
zoom function will be activated.
Select the menu. (l 23)
[Opt.Zoom 16k]:
Optical zoom (Up to 16k)
[D.Zoom 40k]:
Digital zoom (Up to 40k)
[D.Zoom 1000k]:
Digital zoom (Up to 1000k)
This function’s default setting is [Opt.Zoom
16k].
The larger the digital zoom magnification, the
more the image quality is degraded.
If you take your finger off the zoom lever during
zoom operation, the operation sound may be
recorded. When returning the zoom lever to
the original position, move it quietly.
When the zoom magnification is 16k, the
subjects are focused at about 1.2 m or more.
When the zoom magnification is 1k, this unit
can focus on a subject approx. 4 cm away from
the lens. (Macro function)
The zoom speed does not vary when operating
with the adjust zoom button.
Zoom lever/Adjust zoom buttons
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
The zoom speed varies depending on the
range over which the zoom lever is moved.
The adjust zoom buttons are useful for
making fine adjustments to the zoom
magnification.
ヸヵ
ヷヰロ
1
W
T
1
W
T
8
W
T
W
T
8
W
T
W
T
161616
Zoom mode
[RECORD SETUP] # [ZOOM MODE] #
desired setting

Table of Contents

Related product manuals