54
VQT2D32
Function Effect/Setting method
Automatic face
framing
[OFF]:
Not display
[PRIMARY]:
Only the prioritised face
framing is displayed.
[ALL]:
All face detection framings
are displayed.
In the Intelligent auto mode, detected faces appear with frames.
Select the menu. (l 23)
[RECORD SETUP] # [FACE FRAMING] # desired setting
≥ This function’s default setting is [ALL].
≥ Up to 15 frames are indicated. Larger faces and faces nearer to
the centre of the screen take preference over others.
∫ Prioritised face framing
Prioritised face framing is displayed in orange. Focus and
adjustment of brightness will be performed against the prioritised
face framing.
≥ Focus will be set to prioritised face framing when the button
is pressed halfway when recording still pictures. Prioritised face
framing will turn to green when the focus is set.
Digital cinema colour
Recording motion pictures with more vivid colours, using
x.v.Colour
™
technology.
≥ The intelligent auto mode is set to off. (l 34)
Select the menu. (l 23)
[RECORD SETUP] # [Digital Cinema Colour] # [ON]
≥ For more realistic colours, use an HDMI mini cable with a TV that
supports the x.v.Colour
™
.
Wind noise reduction
This is for reducing the wind noise coming into the built-in
microphones depending on the wind strength.
≥ The intelligent auto mode is set to off. (l 34)
Select the menu. (l 23)
[RECORD SETUP] # [WIND CUT] # [ON]
≥ This function’s default setting is [ON].
Zoom microphone
Directivity of the microphone is interlocked with the zoom
operation. Sounds near the front of the unit are recorded more
clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ The intelligent auto mode is set to off. (l 34)
Select the menu. (l 23)
[RECORD SETUP] # [ZOOM MIC] # [ON]
To Next Page
Loading...
