86
VQT2D32
∫ To watch images on a regular TV
(4:3) or when both sides of the
images do not appear on the
screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
Select the menu. (l 23)
Example of images with a 16:9 aspect ratio on
a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.
Select the menu. (l 23)
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[DETAIL]:
All information displayed
* This setting is only available in recording
mode.
≥ When the unit is purchased, the recording
mode is set to [SIMPLE] and playback mode is
set to [OFF].
≥ When the power is turned off, the settings
return to these values.
≥ When connecting with a HDMI mini cable, be sure to connect to a HDMI input terminal. Do not
connect to a HDMI output terminal on other products.
≥ When an HDMI mini cable or component cable is simultaneously connected with an AV cable, the
output from the HDMI mini cable or component cable is prioritised.
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
[SETUP] # [EXT. DISPLAY] # desired
setting
Refer to the following support site for information about the Panasonic TVs that you can
directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
To Next Page
Loading...
