EasyManua.ls Logo

Panasonic HDC-TM40 - Charging and Recording Time

Panasonic HDC-TM40
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
VQT3K07
Charging and recording time
Charging/Recording time
Temperature: 25 oC/humidity: 60%RH (When using AC adaptor)
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
HDC-SD40
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable time
Actual
recordable
time
Supplied battery/
VW-VBK180 (optional)
[3.6 V/1790 mAh]
2h25min
[HA], [HG],
[HX]
2h15min 1h10min
[iFrame] 2h40min 1h25min
HDC-TM40
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable time
Actual
recordable
time
Supplied battery/
VW-VBK180 (optional)
[3.6 V/1790 mAh]
2h25min
[HA], [HG],
[HX]
2h15min 1h10min
[iFrame] 2h40min 1h25min
Battery capacity indication
The display changes as the battery capacity reduces.
####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then will flash.
The remaining battery capacity is displayed when using the Panasonic battery that you
can use for this unit. The actual time can vary depending on your actual use.
When using the AC adaptor or batteries made by other companies, the remaining
battery capacity will not be shown.
HDC-SD40&TM40GC_VQT3K07_mst.book 10 ージ 011年1月14日 金曜日 午前10時57分

Related product manuals