Panasonic HDC-TM40 - Playback Controls and TV Output; Motion and Still Picture Playback Controls; Connecting for TV Viewing

18
VQT3K07
5 Select the operation icon using
3/4/2/1.
A Operation icon
≥ Press the ENTER button to display/not-display
the operation icon.
Watching Video/Pictures on your TV
1 Connect this unit to a TV.
≥ Check that the plugs are inserted as far as they go.
≥ Do not use any other AV multi cables except the supplied one.
≥ When connecting to the component terminal of the TV, the yellow plug of the AV multi cable
is not required.
≥ When connecting to the AV terminal of the TV, do not connect the component terminal plug
of the AV multi cable. Image may not display when the component terminal plug is
connected simultaneously.
2 Select the video input on the TV.
3 Change the mode to to play back.
Motion picture playback Still picture playback
1/;: Playback/Pause
6: Rewind playback
5: Fast forward playback
∫: Stops the playback and shows
the thumbnails.
1/;: Slide show (playback of the still
pictures in numerical order)
start/pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
∫: Stops the playback and shows
the thumbnails.
A AV multi cable (supplied)
0h00m00s0h00m00s0h00m00s

AV MULTI
HDC-SD40&TM40GC_VQT3K07_mst.book 18 ページ ２０１１年１月１４日 金曜日 午前１０時５７分