Panasonic HDC-TM40 - Media Selection for Recording; Choosing Recording Media for HDC-TM40; Recording Motion Pictures; Starting and Pausing Motion Recording

15
VQT3K07
The card and built-in memory can be selected separately to record motion pictures or still pictures.
1 Change the mode to .
2 Select the menu. (l 19)
3 Select the media for recording the motion pictures and the media for
recording the still pictures using 3/4/2/1, and press the ENTER
button.
≥ The media is selected separately to motion pictures or still pictures is highlighted in yellow.
≥ Select and press the ENTER button to return to the previous screen.
4 Press the MENU button to complete the settings.
≥ Open the lens cover before turning on
the unit.
1 Change the mode to and
open the LCD monitor.
2 Press the recording start/stop
button to start recording.
A When you begin recording, ; changes
to ¥.
3 Press the recording start/stop
button again to pause
recording.
Basic
Selecting a media to record [HDC-TM40]
: [MEDIA SELECT]
A [VIDEO/SD CARD]
B [VIDEO/Built-inMemory]
C [PICTURE/SD CARD]
D [PICTURE/Built-inMemory]
Basic
Recording motion pictures




HDC-SD40&TM40GC_VQT3K07_mst.book 15 ページ ２０１１年１月１４日 金曜日 午前１０時５７分