107
VQT3J15
∫ To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥ /
To copy scenes or still pictures from the built-
in memory or HDD to an SD card, see page
98.
∫ To dub using equipment with a
USB terminal
You can dub by connecting a USB cable.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn on the unit (This function is available in all modes).
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1 Connect the unit to the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥ The USB function selection screen will appear on the screen of the unit.
2 Touch [RECORDER] on the screen of this unit.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
≥
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
3 /
Touch the media you wish to dub.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
Dubbing in high-definition picture quality
You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
≥ Depending on the recorders or the media to be copied to, you may not be able to
copy in high-definition (AVCHD) picture quality. For further details, see the
operating instructions of your recorder.
≥ Note that the equipment described may not be available in certain countries and
regions.
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book 107 ページ ２０１１年１月５日 水曜日 午後２時５１分
To Next Page
Loading...
