Panasonic HDC-TM80K - Connecting with a HDMI mini cable; Connecting with the AV multi cable; Changing the component output setting

To Next Page

To Previous Page

VQT3J15

Connecting with a HDMI mini cable

Select the desired method of HDMI output.

≥ [AUTO] determines the output resolution automatically based on information from the

connected TV.

If the images are not output on the TV when the setting is [AUTO], switch to the method

[1080i] or [480p] which enables the images to be displayed on your TV. (Please read the

operating instructions for the TV.)

Connecting with the AV multi cable

AV multi connector output setting can be changed.

Changing the component output setting

: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080i]/[480p]

: [SETUP] # [AV MULTI] # desired setting

[COMPONENT]: When connecting to the component terminal

[AV OUT]: When connecting to the video terminal

: [SETUP] # [COMPONENT OUT] # desired setting

[480i]: When connecting to the component terminal on the TV compatible with 480i.

(Playback is in standard quality.)

[1080i]: When connecting to the component terminal on the TV compatible with

1080i. (Playback is in high definition quality.)

HDC-SD80_TM80_HS80-P-VQT3J15_mst.book 95 ページ２０１１年１月５日　水曜日　午後２時５１分

Related product manuals