73
VQT3J15
White balance
Automatic white balance function may not reproduce natural colors depending on the scenes
or lighting conditions. If so, you can adjust the white balance manually.
≥ Press the iA/MANUAL button to switch to Manual Mode. (l 72)
1 Touch [WB].
2 Touch / to select White balance mode.
≥ Select the optimal mode by confirming the color on the
screen.
≥ Touch [WB] to select the mode.
≥ To return to auto setting, set to or press the iA/MANUAL button again.
∫ To set the white balance manually
1 Select , fill the screen with a white subject.
2 Touch and set the blinking .
≥ When the screen turns black instantly and the display
stops flashing and then lights constantly, the setting is
complete.
≥ If the display continues flashing, the white balance
cannot be set. In this case, use other White balance modes.
≥ When the display flashes, the manual white balance previously adjusted is stored.
Whenever recording conditions change, re-set the white balance.
≥ When setting both the white balance and the iris/gain, set the white balance first.
≥ is not displayed on the screen when is being set.
Icon Mode/Recording conditions
Auto white balance adjustment
Sunny mode:
Outdoors under a clear sky
Cloudy mode:
Outdoors under cloudy sky
Indoor mode 1:
Incandescent light, video lights like in the studio, etc.
Indoor mode 2:
Color fluorescent lamps, sodium lamps in gymnasiums etc.
Manual adjustment mode:
≥ Mercury-vapor lamps, sodium lamps, some fluorescent lights
≥ Lights used for wedding receptions at hotels, stage spotlights in theaters
≥ Sunrise, sunset, etc.
AWB
HDC-SD80_TM80_HS80-P-VQT3J15_mst.book 73 ページ ２０１１年１月５日 水曜日 午後２時５１分
To Next Page
Loading...
