LED indicator
Y
ou can use the LED indicator to confirm the camera’s status.
Indicator Status
Off
No power, or LED indicator is turned off
*
1
Blue, lit Normal operation, connected to wireless
r
outer
*1
, privacy shutter is open
White, lit Normal operation, connected to wireless
r
outer
*1
, privacy shutter is closed
White, blinking quickly Camera is searching for wireless router
Green, lit Initial setup required
Green, blinking slowly Initial setup is in progress with mobile device
c
onnected
Green, blinking Initial setup is starting
Red, lit
Motion detected
*1
, or camera is starting up
Red, blinking slowly Live images are being viewed or recorded, or
c
amera is starting up
Red, blinking Device malfunction
*1 You can configure the camera so that its LED indicator does not light
during normal operation or when motion is detected. For more
information, refer to the User’s Guide (page 28).
14
For a
ssistance, please visit http://shop.panasonic.com/support
Setup
To Next Page
Loading...
