Information about
n
ight vision mode
The camera features an array of
infrared LEDs that light
automatically in low-light
conditions, allowing camera
images to be viewable even when
the surrounding area is dark.
Note:
R When night vision mode is
active, the colors in camera
images may appear different
from normal.
R When night vision mode is
active, the array of infrared
LEDs that surround the
camera’s lens light up in a faint
red color that can be seen in
the dark.
R If the camera is installed in front
of a window and points directly
at the window, images may be
poor when night vision mode is
active.
Wall mounting
D
rive two screws (not supplied)
into the wall, and then mount the
unit as shown.
31 mm (1 7/32 inches)
Screws
N
ote:
R Make sure that the wall and the
fixing method are strong
enough to support the weight of
the unit.
Adjusting the angle
A
djust the angle as desired.
Note:
R When adjusting the angle,
make sure the unit does not tip
over.
26
For a
ssistance, please visit http://shop.panasonic.com/support
Appendix
To Next Page
Loading...
